Stockio

SSL Checker: Test Your Site With SSL Labs for Free

SSL Labs grades your website's HTTPS setup from A+ to F and explains what to fix, from expired certificates to old protocols. Here is how to read the report.

By Ravi Desai

DevOps & Security Engineer ·

On this page

The padlock in the address bar tells visitors a site uses HTTPS, but it says nothing about how well. Behind that padlock are a certificate, a list of protocol versions and a set of encryption settings, and any of them can be out of date. An SSL checker inspects all of it from the outside. The best-known free one is the SSL Server Test from Qualys SSL Labs, which grades a site from A+ down to F.

What the SSL Labs test does

You give it a hostname, and it connects to your server the way many different browsers and devices would. It reads the certificate, tries each protocol version, lists the encryption options the server offers, and probes for known weaknesses. The result is a single letter grade plus a long, detailed report.

The service is free, needs no account, and says it uses the domain names and results you submit only to provide the test.

Running a test

  1. Open the SSL Server Test page.
  2. Type your hostname, such as www.example.com. Test the exact name visitors use, and test the version with and without "www" separately if both are in use.
  3. Tick Do not show the results on the boards if you would rather your site not appear in the public "recently seen" lists.
  4. Press Submit and wait. A full test usually takes a minute or two.

If your site sits behind a content delivery network, you are testing the CDN's edge servers, not your origin. That is usually what you want, since it is what visitors connect to.

How to read the grade

The grade summarizes four areas, each scored as a bar: the certificate, protocol support, key exchange and cipher strength.

  • A+ means an excellent setup with extras such as HTTP Strict Transport Security, which tells browsers to always use HTTPS.
  • A is a strong, modern setup. Most sites should aim here at a minimum.
  • B and C usually mean older protocols or weak ciphers are still enabled for compatibility.
  • F points at a serious flaw, such as a known vulnerability or very old protocols.
  • T means the certificate is not trusted: it may be self-signed, issued for a different name, or missing an intermediate certificate.

The most common problems and fixes

Most poor grades come from a short list of causes:

  • Expired or soon-to-expire certificate. Set up automatic renewal. Most hosts and Let's Encrypt clients do this for you, but check that it is actually running.
  • Name mismatch. The certificate covers example.com but not www.example.com, or the other way around. Reissue it to cover every name you serve.
  • Incomplete chain. The server sends your certificate but not the intermediate certificate that links it to a trusted authority. Some browsers cope; others show a warning. Install the full chain your provider gives you.
  • Old protocols enabled. TLS 1.0 and 1.1 are deprecated. Turn them off and keep TLS 1.2 and 1.3.
  • No HSTS. Adding the Strict-Transport-Security header is often the step from A to A+. Add it once you are sure every page works over HTTPS, because browsers will remember it.

On managed hosting, many of these settings live in the control panel, or are handled by support. On your own server, the web server's TLS configuration is where you make the change.

The handshake simulation

Further down the report is a list of simulated clients, from old Android phones to the latest browsers, with the protocol and cipher each would use. This is the section to check before you switch off an older protocol: it shows whether any device your visitors still use would lose access. For most sites in 2026, dropping old protocols affects almost no one.

When to run it

Run a test after setting up a new site, after changing hosts or CDNs, after renewing or replacing a certificate, and every few months as a habit. It takes two minutes, and it often catches an expiring certificate or a forgotten subdomain before visitors see a browser warning.

If you are choosing where to host your next project, our roundup of web hosting providers for beginners notes which include free certificates and automatic renewal.

The bottom line

SSL Labs turns a complicated HTTPS setup into a single grade and a clear to-do list. Aim for an A, fix trust and chain problems first, turn off old protocols, and add HSTS when you are ready for the A+.

Featured sponsor

Reach designers & developers at work

Put your product next to the tools people use every day. One sponsor per placement.

Become a sponsor